Power Output

[W5ZIT]

I have been running my Ten Tec Pegasus at about 60 watts for Olivia for some time, and I had to turn the audio down from the computer to reduce the power output for PSK-31.

I recently discovered an option in MixW that allows you to set the audio output from the sound card on a 'per mode' basis.  I leave the output set to 1.0 for Olivia and all the other non-simultaneous tone modes, and set the output to 0.6 for PSK-31.  This brings the PSK-31 output down to the linear point to reduce the intermod.

This has eliminated my adjustment of the audio driving my Pegasus depending on what mode I am using.

I thought I would share this info in case someone else had missed this capability in MixW.

73 - Jim  W5ZIT

[grobin]

I run into a similar problem with running a few different modes with FLDigi also.  I have a USB SignalLink that has it's own controls so I can reset them easily but I would like to see that feature in FLDigi also - AND other programs too. 

--Gary WB8ROL